The importance of maintaining the right tire pressure cannot be overemphasized. For instance, driving with low tire pressure will reduce vehicle performance. Underinflated tires will cause rough handling, poor gas mileage, and an increased chance of accelerated and uneven tire wear.
It can even cause tire blowouts in the middle of nowhere. Maintaining proper tire pressure will prevent these issues and save you from expensive repairs. Car manufacturers specify different psi for their tires since their vehicles have different weights and different amounts of load weight they should carry.
This is why we dedicate this blog post to show you the correct Subaru Outback tire pressure, how to inflate the tires properly, and how to clear the Subaru Outback tire pressure light. First, let’s examine the correct Subaru Outback tire pressure 2021, Subaru Outback tire pressure 2022, and all other models.
Subaru outback tire pressure explained.
Like every car model, the Subaru outback tire air pressure is the specified or recommended tire pressure for Subaru Outbacks. The right tire pressure for Subaru Outback is 32 psi for rear tires and 33 psi for front tires. This information is written on your Subaru Outback owner’s manual and the sticker on the driver’s side door.
Kindly note that this information is for the recommended OEM Subaru Outback tires. Therefore, if you purchase sports or high-performance tires, do not escape cross-check the recommended psi for that tire before inflating it. Contact the tire manufacturer’s customer care if you can’t find the specified psi. They’ll assist you with the information.
Here’s a table showing the recommended tire pressure for other Subaru cars.
|Vehicle||Front tire pressure||Rear tire pressure|
|2022 Subaru XV||33 psi||32 psi|
|2022 Subaru WRX||33 psi||32 psi|
|2022 Subaru Impreza||33 psi||32 psi|
|2022 Subaru Forester||33 psi||32 psi|
|35 psi||35 psi|
There is a misconception that all four tires must have the same tire pressure regardless of the recommended psi by the tire manufacturers. While this information is true to a certain degree, disregard it because it is not true with all vehicles. For example, 2021 Subaru Outback tire pressure and other Subaru Outback models have shown that all four tires must not have the same psi.
From the table above, we’ve also seen that other Subaru models have different tire pressure. However, the front tires must have the same tire pressure, and the rear wheels should also have the same tire pressure. Typically, the front tires should have a higher psi than the rear wheels to compensate for the engine load on the front.
However, some vehicle manufacturers may recommend the same tire pressure for all the tires. A good example is the 2022 Subaru BRZ. Here, the manufacturer recommends 35 psi for both front and rear tires.
How do you check the tire pressure on a Subaru Outback?
Do not worry if you don’t know how to check the tire pressure on your Subaru Outback. Most Subaru Outback models have a feature on the steering wheel that allows you to cycle through and see the tire pressure for all the tires.
And, if you see a Subaru Outback tire pressure light on the dash, know that one or more of your tire pressure is low. We published a detailed article on how to fix low tire pressure. Check it out and learn how to fix low tires yourself.
Like other car models, you can manually check your Subaru Outback tire pressures with a tire pressure gauge. To do this, locate and remove the tire valve stem cap and plug in the tire gauge. Wait for some seconds for the gauge to give you an accurate reading. Do this on all the tires simultaneously.
Even without the Subaru Outback tire pressure display on the dash and without tire gauge, you can know when you have a low tire pressure by looking at the tire. However, this will not give you an accurate reading. If you start experiencing rough rides, poor gas mileage, and poor steering, it’s time to check your tire pressures and add some air.
Frequently Asked Questions – FAQs
Q: Is 36 PSI too high for tires?
36 psi can be high or small, depending on the recommended pressure for your tire. For example, tire pressures are usually 30 psi for small tires, 36 for medium, and 42 for bigger tires. This, however, doesn’t mean we have only 30, 36, and 42 psi. Instead, it means that tire pressure falls between these ranges.
If you own a vehicle with medium tires, 36 psi is not bigger. For instance, if the recommended tire pressure for your car is 33 and the maximum safe pressure inscribed on your sidewall is 40, you can safely put 36 psi without compromising vehicle handling or safety.
Q: Why is the tire pressure light on when my tires are fine, Subaru?
If your Subaru Outback tire pressure light stays on even after inflating your tires, you likely have nails in the tire or any other puncture on any of the tires. If this is not the case, try Subaru Outback tire pressure reset. It could be you have computer glitches that triggered the tire pressure light on the dash.
We published an article that explains the Causes, precautionary measures, and how to fix a tire pressure light blinking on the dash. With the information there, you can track the leading cause and learn several ways of fixing the problem.
Q: Is 40 PSI too much for 36 PSI tires?
In general, 40 psi is suitable for sports cars and passenger cars. However, this is too big for most Subaru vehicles. 40 psi is too much for any tire with 35 and recommended psi below that. In other words, 40 psi is not too much for 36 psi tires. In any case, it is better to stick with the recommended psi or, at least, add not more than 2 psi.
Q: What tire pressure should a Subaru Outback be?
As explained in the first few paragraphs, the recommended tire pressure for Subaru Outback is 33 psi for the front and 32 psi for the rear tires. The manufacturer recommends 33 psi for front and 32 for rear tires because of the engine weight on the frontal end.
Q: What should Subaru tires be inflated to?
Generally, Subaru tire pressures should be between 32 to 36 psi. The manufacturers usually recommend different psi for the front and rear tires on some models. It is important you check the owner’s manual to know the exact recommended psi for your Subaru model.
How to check the tire pressure on your Subaru YouTube
Always inspect your tires when checking your Subaru Outback tire pressure. If the tires are wearing unevenly, visit your mechanic for a tire rotation. This will help to extend the tire’s lifespan. But if you have cracked, cupping, or bad tires, it’s time to get a new set of tires.
In summary, Subaru manufacturers recommend 33 psi for Subaru Outback front tires and 32 psi for the rear tires. You can also see the tire pressures on your Subaru Outback using the info paddle feature on the steering wheel or a tire gauge.