7 Best Ball Joint Press Tool Reviews 2024

Are you frustrated using ball joint press tools that make it difficult for you to conveniently service your suspension ball joints? And you just can’t seem to find the best ball joint press that you can use to service your joints effectively.

It is important you get a good quality ball joint press that you can easily work with. You will get to enjoy a whole lot of benefits. Using a standard ball joint presser makes servicing your vehicle much easier which saves time and energy. Here is some recommended ball joint press that should be on your list of automobile DIY tools.

Best Ball Joint Press

Comparisons Table Ball Joint Press

OMT Heavy Duty Ball Joint...
OTC 6559 Ball Joint...
Astro Pneumatic Tool 7897...
OMT Heavy Duty Ball Joint...
OTC 6559 Ball Joint...
Astro Pneumatic Tool 7897...
Amazon Prime
Amazon Prime
OMT Heavy Duty Ball Joint...
OMT Heavy Duty Ball Joint...
Amazon Prime
OTC 6559 Ball Joint...
OTC 6559 Ball Joint...
Astro Pneumatic Tool 7897...
Astro Pneumatic Tool 7897...
Amazon Prime

The Best Ball Joint Press Tool

01. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit.

The Orion Motor Tech Bolt Joint Tool with a 4WD adapter is a ball joint service kit that you must have. We have used this tool for a long period, and I have to say that it was worth every penny. It is a forged steel tool and set that is great for removing and replacing not just your suspension ball joints but other press-fit parts in your vehicles.

This tool kit can even help in removing corroded and rusted parts. Many professional and young mechanics can conveniently use this tool in carrying out repairs on vehicles because it is handy and easy to use.

This joint toolset fits most two-wheel-drive and four-wheel-drive vehicles and light pickup trucks with press-fit type ball joints. It also has a four-wheel-drive adapter that allows service for 2967 thru current ½ and ¾ ton 4WD cars having the Dana 30 or 44 front axle (found on Ford, Dodge, IHC, Jeep, and GM vehicles).

Key Features
  • Removes rusted and corroded parts in your vehicle.
  • Blow molded case for easy storage.
  • Made up of steel.
  • This tool is a ten-piece ball joint removal toolset.
  • Can be used for both two-wheel and four-wheel vehicles.
  • C-frame press, three-receiver sizes
  • Equipped with installation and removing adapters.
  • Very handy
  • Professional grade quality
  • High quality
  • High value
  • The tools are conveniently organized in a custom-molded case.
  • Compatible with a wide range of vehicles.
  • It is an essential tool for ball joint service.
  • This tool might be heavy for some users.
  • It is not a play tool.
  • You will need to read a repair guide to properly use this toolset.

02. Astro Pneumatic Tool 7865 Ball Joint Service Tool

If you need a tool that will enable you to easily service the ball joints of your vehicle’s suspension system, you need to consider purchasing the Astro Pneumatic 7865 Ball Joint Service Tool with 4WD adapters; it is a steel ball joint removal tool, best for removing or installing your vehicle’s parts like the ball joints, and universal joint. This press tool is also used for scraping out rusted suspension components.

Astro Pneumatic Tool company is a popular tool brand that produces high standard and quality tools. Getting this tool will help you achieve any of its design functions easily. With this tool kit in your possession, you do not need to worry about taking your vehicle to the mechanic shop to help you with servicing your vehicle’s suspension joints. It has all it takes to help you carry out the servicing of various press-fit parts of your vehicle without stress.

Key Features
  • The molded case for easy storage and transport.
  • It includes a four-wheel drive ball joint service kit.
  • This tool can be used for removing and replacing press-fit parts, including ball joints.
  • Used for removing rusted and corroded parts in your vehicle.
  • Made with heavy-duty forged steel.
  • Contains a C-frame press, three-receiver sizes.
  • Allows service for 1967 thru current ½ and ¾ ton 4WD vehicles having the Dana 30 or 44 front axle (found on GM, Ford, Jeep, and IHC cars)
  • Very handy
  • Easy to use.
  • It is needed in ball joint servicing.
  • High grade and quality.
  • Used for four-wheel-drive vehicles.
  • This kit can be easily transported.
  • Can only be used as a service kit for 4WD vehicles.
  • Lifting this kit might be heavy for some users.
  • It is not a very fancy tool.

03. OTC 6559 Ball Joint Master Service Kit

The OTC Ball Joint Master Service Kit is an All-In-One tool kit that offers a wide range of services to cars, trucks, vans, or SUVs. Owning this type of tool, you don’t need to purchase any other tool to service your ball joints. It is taken to be one of the best master service kits you can get anywhere in the world.

This master kit is equipped with a lot of gadgets and components that can conveniently handle all your ball joint service needs. Many vehicles have press-in ball joints, and a lot of car owners are looking for make-shift solutions for servicing their vehicles. This tool is just for you. Everything you need to service your press-fit parts is in this service toolset.

With this type of kit, finding the correct adapters and using them correctly is the key to minimizing service time. Although its price might be a little bit steep, buying this kit is considered an investment.

Key Features
  • Complete coverage of car, truck, van, and SUV applications.
  • Comes with 70+ adapters c-frame and application guide.
  • Application guide that covers up to 2008
  • The adapter set covers vehicle models listed through the current model year.
  • It has a molded case for storage and easy transport.
  • Covers everything you need in ball joint servicing.
  • Equipped with many tools that will make servicing ball joints or other press-fit parts easy.
  • Used for car, truck, van, and SUV.
  • Comes with an application guide.
  • This master tool is of high quality and standard.
  • It can be easily carried about.
  • Very useful.
  • Highly durable.
  • It is handy.
  • You will need to read the application guide before using this tool.
  • It is not very attractive, though this is a far less demerit to consider.
  • The tools should be more organized inside the case.

04. Powerbuilt 23 Piece Ball Joint and U Joint Service Set – 648617

Changing or replacing your vehicle’s suspension ball joints can be time-consuming, having to disassemble various parts of your vehicle to service the ball joints, and most times, even when you do not need to loosen many components to properly service your ball joints, it still takes a lot of time.

That’s why it’s important that you get the Powerbuilt 23 Piece Ball Joint & U-Joint Service Kit. This innovative service toolset saves time and frustration by helping you remove and install the press-fit type ball joints in your vehicle easily and without a headache. With this service kit, you do not need to remove your vehicle’s control arm before you can service your ball joints.

This kit can be used on a wide range of vehicles, both domestic and imported. Any special tool can help you make an automotive repair or maintenance task easily but having this tool in your possession has many more benefits.

Key Features
  • Molded storage case
  • Harm Bal/crank pulley
  • It comes with a step-by-step instruction manual.
  • Durable storage case
  • Service kit for most domestic and import rear-wheel drive vehicles.
  • Receiving tubes
  • Installing cups
  • Remover
  • Installing adapter
  • It has a C – frame
  • sockets
  • Receiving tubes
  • Installing cups
  • Removers
  • Receiving cups
  • It can also be used in removing and installing U-joints.
  • Built to exceed tool standards
  • Provides tool solutions for almost all situations.
  • Highly durable.
  • High-quality tool.
  • This tool can be used for ball and U-Joint servicing in different models of vehicles.
  • Saves time and energy
  • Quite heavy to carry
  • This tool is quite complex to use.

05. GEARWRENCH Universal Ball Joint Separator – 3916D

This is one of the best joint separator tools that I have come across in my professional career as a mechanic. It makes separating the ball joints of a vehicle so much easier. I am glad to have been recommended this tool. The GEAR WRENCH Ball Joint Separator Tool specializes in making your suspension ball joints service a lot easier to perform. It is designed with a cushion grip for you to comfortably handle the tool.

For mechanics or car owners, finding it difficult to detach a vehicle’s ball joint from the spindle’s support. You should not struggle with this anymore. Using this ball joint separator tool will allow you to achieve this easily. It is a very simple tool and easy to handle.

Key Features
  • Maximum operating capacity
  • Slot
  • It is made up of steel.
  • Gotten from the finest components under the most stringent manufacturing guides.
  • Very handy.
  • It is easy to work with.
  • Durable.
  • Comfortable grip.
  • Can be used for detaching your ball joint from your support spindle on all FWD vehicles.
  • Adjustable to different sizes of ball joints.
[/su_list] [/su_box]
  • Cannot be used for all sizes of the socket.
  • Only used for servicing a ball joint.

06. Orion Motor Tech 21PCS Master Ball Joint Press.

Great Product! The Orion Master Joint Press Tool is the perfect tool for you if you are scanning for a tool that will assist you to serve different types of joints in your vehicle. This master tool can easily remove your vehicle’s brake anchor pins, U-joints, ball joints, and much more parts on two-wheel-drive (2WD) and four-wheel-drive) vehicles. This master ball joint press is organized in an ABS portable case.

With the aid of this tool, you can do all these without having dismantled other components or removing the control arm from your vehicle before you begin servicing your press-fits parts. You do not need to purchase several tools that will help you service the joints of your vehicle. Once you have this tool within your reach, you will be able to service any type of joints used in designing your vehicle’s suspension system without any stress.

‘Orion Motor Joint Press Full Set Tool’ is an all-in-one joint servicing tool.

Key Features
  • It has a heavy-duty ABS portable case.
  • Heavy-duty Steel Workmanship
  • Premium impervious finish
  • Indispensable C-Clamp
  • Intuitive Craftsmanship
  • Ball Joint Remover –A C-Frame Press – U Installer – Q Installing Adapter – N Installing Cup – C, H Live Center Forcing Screw Plug – S
  • Receiving Cup — F, P, I Receiving Tube — D, E, G, J, K, L, O Remover — R Remover Cup — B Removing Adapter – M
  • C Frame Screw
  • Install Adaptor Remover Adaptor
  • Center Plug
  • Remover Installers
  • Receiving Tubes
  • Installing Cups
  • Receiving Cups
  • It is conveniently organized in a custom-molded case.
  • Durable.
  • High-grade quality and durability.
  • Universally compatible with a wide range of vehicles.
  • An essential tool for ball joint service.
  • It can be used to service all types of joints.
  • Used to remove bushings.
  • Quite heavy.
  • A guide might be needed on how to properly use this toolset.
  • The case is good but can be made stronger.

07. Astro Pneumatic Tool Ball Joint Service Tool and Master Adapter Set

Tired of using crappy tools, and you need a toolset with all sizes of receiver tubes and adapters to easily service your ball joints. It is advisable to buy the Astro Pneumatic Tool 7897 Ball Joint Service Tool and Master Adapter Set. I have used this tool anytime I perform joint servicing, and it is very efficient and reliable.

The Astro Pneumatic Tool 7897 Ball Joint Service Tool and Master Adapter Set includes all of the receiver tubes and adapters that have to be used to service upper and lower ball joints on most almost all vehicles’ models. It has a blow-molded carrying case that keeps the tool organized and easy to transport.

Key Features
  • All receiver tubes
  • Adapters
  • Maximum duty C – frame
  • Blow-molded carrying case
  • The tools are organized and easy to transport.
  • It is used to service press-fit upper and lower ball joints.
  • Can change press-fit upper and lower ball joints.
  • The C – frame can be used to change universal joints
  • The tool is of high standard and quality.
  • This toolset does not have an instruction manual.
  • The case is of thin plastic.

Things You Should Consider Before Buying Ball Joint Press

Do not be in a hurry to decide on which toolset to purchase. To ensure you purchase the best ball joint press, you must consider a few factors to make the best choice possible.


The ball joint press is meant to stay inside your vehicle and not some corner in your garage, so it can be within your reach whenever you need it to service your vehicle’s suspension press-fit parts. Before you purchase any tool kit, make sure it has a case with a handle so the tools can be well organized. It will lower the chance of misplacing any of the tools.


The price of the tool kit you want to buy should also be considered. You should consider getting a single toolset that can serve all your needs instead of buying several toolsets. Though the price of getting a standard one might be steep, investing in an all-in-one tool kit can help you save money. For car owners who might rarely service their vehicle system, you can get a low-budget toolset.

Versatility and Compatibility

Not all cars use the same kind of joints and brake pins; that’s why you need to check the versatility and compatibility of the toolset you are about to buy, so you will be able to service your joint system irrespective of the type of vehicle you are using.


Knowing the material used in manufacturing the tools set will determine if it will be long-lasting or not. It is better to go for a tool kit that is made of carbon steel. Steel tools are very strong and durable.

Tool Set

To service your vehicle’s ball joints, you might require several tools. So instead of buying single tools, it is a much better option to buy a toolset that holds major service tools like receiver tubes, C-frames, installing cups, screws, and points.

What Is The Ball Joint Press?

The ball joint press is a tool that helps you to easily service the ball joints of your vehicle. If you are experiencing a dull noise each time you turn your vehicle’s steering wheel, your ball joints can be responsible for that noise, and you need to replace it immediately so you can avoid any further mishap from happening. This is a tool that should be on every mechanics tools list, professional or novice.

To successfully replace or remove a worn-out ball joint press, you need a ball joint press. You cannot service your vehicle’s ball joints without using a ball joint tool.

Having this tool in your possession has a lot of benefits, including; preventing your tires from getting damaged, enabling you to service your ball joints by yourself, saving you time and money. This tool can also help you remove corroded or rusted parts in your vehicle, not to mention its added advantage that allows you to replace your brake system.

You need to ensure that the ball joints in your vehicle are effective, as a faulty or damaged ball joint can cause a misalignment in your vehicle’s wheels, which can lead to the shaking of your tires while driving. This can drastically reduce the handling quality of your vehicle. So, getting a ball joint press is very important to adjust or change your ball joints when necessary.

How To Use The Ball Joint Press To Replace Ball Joints

Your vehicle’s suspension system needs to be kept in good shape. This involves making sure that major components like the shock absorbers and ball joints are serviced regularly. Driving with a defective ball joint can lead to several negative effects, which you should avoid as much as possible. This guide will aid you on how to use the ball joint press to replace your suspension ball joint easily:

  • Raise your vehicle’s front end with a floor jack. Make sure the jack is well-fitted for your vehicle.
  • Use a wrench to carefully detach the wheels of your vehicle.
  • Then unscrew the mounting bolts on your brake caliper and remove the caliper.
  • Gently take off the tie-rod end and your lower strut bolts. Doing this will enable you to freely move the knuckle of your steering wheel. If you have a worn tie rod end, you can replace it now.
  • Remove the cotter pin to allow you to detach the upper control arm. After this is done, you can now use the ball joint press to remove your ball joint.
  • Set your ball joint press over your vehicle’s ball joint on the control arm. Place the long-threaded shaft of the ball joint press to face upward.
  • Then, set the ball joint press’s deep cup over your ball joint’s top; this will help contain the ball joint.
  • Fasten the threaded shaft on your ball joint press enough to remove the ball joint from the control arm. You can do this using either a socket and ratchet.
  • You can put it in the new ball joint. To do this, place the deep cup part of the joint press on the new ball joint. Then fasten the threaded shaft, and the new ball joint should fall into the right place.
  • Ensure that your ball joints are moving straight after a few turns of your ball joint press.

Ball Joint Press (FAQs)

Q: Can you replace a ball joint without a ball joint press?

A ball joint cannot be replaced without using a ball joint press. The joint press is the only tool that can be used to successfully detach a joint from the control arm that was pressed in by the manufacturer. If you try using a different tool, it will damage the ball joint and will also lead to socket and stud breakage. This can collapse your suspension system completely.

Q: How does a ball joint press work?

To successfully use the ball joint press to remove the ball joint in your vehicle’s suspension system, you need to position it on the top of the damaged ball joint on the control arm. Then place the long-threaded shaft of the joint press to face the upward direction and place the deep cup part on the ball joint; use a ratchet and socket to fasten the threaded shaft the ball joint will pop out.

To replace the ball joint, place the ball joint press’ deep cup part on the new ball joint and then fasten the threaded shaft. This will slide the new ball joint into its place. It’s that easy!

Q: Can you hammer in a ball joint?

It is not advisable to hammer in a ball joint because this act can cause a ripple effect of damage when used on the bottom of the ball joint. Also, the foliation on the ball joint can deform into the knuckle, and this will also cause damage and premature tearing. The best option is to get a ball joint press to place in your ball joint.

Q: How do you remove a ball joint without a tool?

The upper ball joint can be replaced while the upper control arm is still in the car. Some ball joints can be removed independently from the control arm system, but it is not easy. A press is needed to still get the ball joint out. If it is a bolted ball joint, in this case, all you need to do is to take off the bolts and place them in the new joint.

Q: Should I replace upper and lower ball joints at the same time?

It is not compulsory to replace both at the same time, just the ones that are faulty. However, when one ball joint is faulty, the other one could be worn out too. In pickup vehicles with a double arm front suspension system, the upper and lower ball joints on each side are often removed and replaced at the same time because of labor overlap.

Q: How long will does the ball joint last?

Ball joints usually last for at least about 80,000 miles. Of course, they cannot last for decades. The extent to which your suspension’s ball joint will last majorly depends on the condition of the roads you drive on and your manner of driving. As your ball and socket begin to wear out, the ball joint will gradually lose its effect. Regular maintenance might help prolong the life span of your ball joints.

Q: Can the ball joint press be used to remove the ball joint from spindles?

Spindles have a different type of press, so you might not be able to use the ball joint press tool to remove ball joints from spindles. However, you can use the GEARWRENCH Universal Ball Joint Separator, which was suggested above. It is one of the best ball joint separators. This tool can help you separate the ball joint from the spindle support easily.

Final Words

If you are on the look for the best ball joint press available in the market, then you need to consider purchasing any of the recommended products listed above. Note that every product mentioned is tested and trusted, so you do not need to worry about efficiency. Alert us if you need any assistance regarding this, and we will definitely be of help.

Osuagwu Solomon

Osuagwu Solomon is a certified mechanic with over a decade of experience in the mechanic garage, and he has over five years of experience in the writing industry. He started writing automotive articles to share his garage experience with car enthusiasts and armature mechanics. If he is not in the garage fixing challenging mechanical problems, he is writing automotive repair guides, buyer’s guides, and car and tools comparisons.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts